NOC aims to make the highest quality measurements through its involvement in projects such as the EU funded MINKE and research infrastructures such as ICOS
The main advantage of using the Calibration Laboratory of CNR-ISMAR is that, compared to sending the sensors to the manufacturers, shipping costs from Tunisia are greatly reduced.
Two MINKE partners, OGS and Ifremer, were part of the workshop’s international organizing team
Scientists highlight the need for completeness of data on biodiversity, one of the key topics of MINKE.
Authors: A. Bordone (a), G. Cerrati (a), T. Ciuffardi (a), F. Conte (a), F. Pennecchi (b), G. Raiteri (a), F. Reseghetti (a)
a- ENEA – Marine Environment Research Centre of S. Teresa, 19032 Pozzuolo di Lerici (SP), Italy
b- INRiM – Istituto Nazionale di Ricerca Metrologica, Strada delle Cacce 91, 10135 Torino (TO), Italy
Corresponding author: firstname.lastname@example.org
To read the full document click here
Abstract: Total Suspended Solids (TSS) is considered a very important oceanographic quantity to describe the status of the seawater column. The ENEA Marine Environment Research Centre of Santa Teresa, devoted since the ‘70s to the monitoring, analysis and comprehension of physical, chemical and biological processes in marine environment, has therefore developed an historical experience also in TSS measurement. Aim of the present work is to collect ENEA expertise and internal procedure related to experimental TSS measurement, formalizing in particular the assessment of TSS measurement uncertainty in accordance with reference guidelines and standards. The contribution of mass and volume in the laboratory-based gravimetric method to measure TSS (by filtering process) has been analysed, together with the effect due to repeatability proper of this type of experimental activity. TSS combined standard uncertainty has been finally evaluated, and just the repeatability contribution proved to be the most relevant one (about 10 % in terms of relative standard uncertainty). The link between TSS and Turbidity, continuously optically measured along the water column, is also discussed. Turbidity of a water sample can in fact be used to infer the mass of particles in suspension by means of a sort of a calibration curve that relates TSS to Turbidity itself. This relation can be reasonably approximated by a linear model, whose slope is sample-dependent: consequently, the conversion from a Turbidity profile to a TSS one has to be determined each time. Results prove that this consolidated approach can be applied in the near-shore area, where ENEA performs its monitoring campaigns. The present technical report is intended to serve as a possible basis for developing procedures more and more compliant to international metrological standards, with the aim of further guaranteeing the metrological traceability of oceanographic quantities (EOVs).
Keywords: Total Suspended Solids; Column Water; Turbidity; Standard Uncertainty.
Fig. 1 – Area of interest. Red dots indicate the stations where ENEA, starting from May 2015, usually perform paired TSS and Turbidity profile measurements. Stations are periodically repeated during routine monitoring campaigns.
Fig. 2 – Repeated Turbidity profiles and corresponding TSS measures.
Fig. 3 – Linear relation between TSS and Turbidity.
Fig. 4 – TSS discrete measures and continuous profile obtained by TSS vs Turbidity relation.